Connecting network cables
LiveNX 6210 includes Gigabit Ethernet ports and Integrated Remote Access Controller (iDRAC) ports used for remotely accessing and troubleshooting LiveNX 6210. See LiveNX 6210 front / back panels for the location of these ports.
To connect network cables:
◦ Use a standard Ethernet cable to connect these ports to your network.
TIP: To reach LiveNX 6210 through an SSH connection, you can use an Ethernet cable connected directly between the Gigabit Ethernet port on LiveNX 6210 and your PC or laptop. LiveNX 6210 eth0 port is configured at the factory to have a DHCP IP address with a fail over to 192.168.1.21. The PC or laptop must be configured to be on the same IP subnet.